since 1985

25 year warranty

Watch video

The ladder does it all - Telescopic ladder for stairs

Instructions

1 Gold medal

2 Silber medal

A ladder that can climb steps and stairs

Anything with a telescopic ladder

We have been for 28 years on the market

Goedde-Ladders were awarded a gold medal and two silber medal at the inventor fair in Nurember and New York

No problems with uneven floors

Standing in seconds on each stair

The first stairway stepladder in the world

2 in 1 Step ladder and folding ladder

Stepladders from Gödde
www.ladders-for-stairs.com       www.teleskopleiter.com

Application instructions
Due to the possibility of each leg length adjustment,
this stepladder is suitable for steps and rough surface it
was specially developed for.

That is why it is important to save the stepladder legs
from pushes and blows and clean the telescopic legs
(telescopic extension) from pollution thoroughly, because
otherwise the legs may get stuck.

In case the telescopic legs flounder, it is necessary
to check whether they are not polluted and flywheel
(or a handle with a clamp connection) is turned off well.
If necessary, gently tap by your palm on the rubber
plugs for the legs, until the telescopic legs are shaken
(rubber washer).
In no case use force.

For the own benefit, the stepladder user shall observe
the following guidelines:

Attention!

1. Watch carefully that clamp connection / rail / telescopic leg
imaged on the drawing are impacted. When adjusting the
length of each telescopic leg you should act as follows:

A) Turn the flywheel (A) counterclockwise until the
imaged clamp connection loosens. Move the telescopic
leg to the desired position and

Drawing A
B) tighten the flywheel using force (grooved disc (B)
shall then be flattened), up to the required rivet joint.
If a handle with a clamp connection is available, pull the
lever up (open), pull the lever down (close).

Drawing B

2. Adjust the stepladder in such a manner that all legs
 stand firmly, having set the fixturing struts. Axis of symmetry
of the stepladder should always be in the upright position.

3. Walk up the stepladder from the side, the distance between
the ground and the first tread of which is the least.

4. The last tread is the second tread from the top. If the
telescoping legs are moved forward, it is recommended to use
the auxiliary ladder upright for going up and down.

5. You should use the stepladder only in case all the structural
elements that affect its security are in perfect condition.
Immediately stop using the damaged stepladder.

Inspected for safety by the Technical Inspection Union
 

[ladder for steps, ladder for stairs] [Description ladder] [Examples] [Price list] [Order ladder] [Watch video] [Safety standards] [Gold medail] [Contact] [Link] [Impressum] [Instructions] [Brochure]

ladder, ladders, telescopic ladder, aluminum ladders, adjustable ladders, Reform ladder, alloy ladder, combi ladders, trade ladders, multi purpose ladders, tree way ladder, Scaffolding, scaffold, alloy ladders, combination ladder, telescopic ladders, combi ladders, folding ladder, trade ladders, domestic ladders, industrial ladders, steps ladder,stairs ladder,Ladderstep, telescopic, combi ladder, combination ladders, Hand made ladders